RAD Data comm RIC-E1 operation manual Contents

		Contents
Chapter 1. Introduction
1.1	Overview		1-1
	Versions		1-1
	Application		1-2
1.2	Physical Description		1-2
1.3	Functional Description		1-3
	Functional Block Diagram		1-3
	Timing Reference		1-3
	Diagnostics		1-3
1.4	Technical Specifications		1-4
Chapter 2. Installation and Setup
2.1	Site Requirements and Prerequisites		2-1
2.2	Package Contents		2-1
2.3	Configuring RIC-E1		2-2
	Setting the Jumpers		2-2
	Connecting the Interfaces		2-4
	Connecting the Power		2-5
Chapter 3. Operation
3.1	Front Panel Indicators		3-1
3.2	Operating Instructions		3-2
	Turning On		3-2
	Operating RIC-E1		3-2
	Turning Off		3-2
Chapter 4. Troubleshooting and Diagnostics
4.1	Performing Local Analog Loopback		4-1
	Activating Local Analog Loopback		4-1
	Deactivating Local Analog Loopback		4-2
4.2	Troubleshooting		4-2
4.3	Technical Support		4-3
Chapter 5. RIC-E1/R Card
5.1	ASM-MN-214 Card Cage		5-1
	Line Connector		5-1
	DTE Connector		5-1
5.2	Power Supply		5-3
	AC Supply		5-3
	DC Supply		5-3
	Power Supply with Redundancy		5-3
5.3	RIC-E1/R Front Panel		5-4
5.4	Installing the RIC-E1/R Card		5-6
	Setting Internal Jumpers and Switches		5-6
	Installing RIC-E1/R into the ASM-MN-214 Card Cage		5-7
	Connecting the Interfaces		5-7
RIC-E1Installation and Operation Manual			i
Order from: Cutter Networks		Ph:727-398-5252/Fax:727-397-9610	www.bestdatasource.com