Recording
Tally Light
To Turn the Tally Light ON or OFF
1.Follow steps 1-4 on the previous page.
2.Press 4 or 3 on the mode select dial to highlight Tally.
|
|
|
|
| Tally | ON |
|
| Interval Timer | OFF | |
| Rec Time | OFF | |
| JLIP ID NO. | 0 7 |
|
|
|
|
|
3.Press 6 on the mode select dial to start Tally flashing.
4.Press 4 or 3 on the mode select dial to turn the tally light ON or OFF.
•Select ON to have the tally light turn on during recording.
•Select OFF if you do not want the tally light to light.
5.Press 5 to stop Tally flashing.
6.Press MENU to exit the menu.
Set the JLIP ID NO.
The camcorder has a JLIP (Joint Level Interface Protocol) connector that may be used in the future to connect a device, such as a home computer.
To Select a JLIP ID NO.
1.Follow steps
2.Press 4 or 3 on the mode select dial to highlight JLIP ID NO.
| Tally | ON | |
| Interval Timer | OFF | |
| Rec Time | OFF | |
|
|
|
|
| JLIP ID NO. | 0 7 |
|
|
|
|
|
3.Press 6 on the mode select dial to start JLIP ID NO. flashing.
4.Press 4 or 3 on the mode select dial to a number from 01 to 99.
5.Press 5 to stop JLIP ID NO. flashing.
6.Press MENU to exit the menu.
59
