RCA CC638/639 manual Playback on TV or VCR with AUDIO/VIDEO in Jacks, Installation

Playback

Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks, you will need an optional audio/video cable such as VH83 shown on page 94.

If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV.

	Back of
Mono VCR or				1 White
TV Monitor							Audio/Video
				Audio Plug
							Output Cable
		AUDIO					(Optional)
			IN					AUDIO Jack
		VIDEO
			IN					3
				2 Yellow Video Plug
					OR			4
Back of
				Y-Adapter		1 White
Stereo VCR or
						Audio		Audio/Video
TV Monitor				(Optional)
						Plug		Output Cable
			L					(Optional)
AUDIO								3
	IN
			R
VIDEO
	IN							4

2Yellow Video Plug

SNAP

SHOT

–	+	B
		C

		JLIP	VCR
			POWER
			OFF
			CAMERA
		AUDIO
BATT.		RF
	RELEASE	DC OUT
		VIDEO

VIDEO Jack

Installation

1Attach the white plug on one end of the audio/video cable to the AUDIO IN jack on the TV (or VCR).

Notes: If your cable does not have white and yellow plugs, just be sure to attach the same color to the audio jacks.

If your TV (or VCR) has stereo AUDIO IN jacks, attach the plug to the one labeled MONO. If one is not labeled MONO, you may need a Y-adapter, such as AH25, shown on page 94 to hear both channels.

2Attach the yellow plug to the VIDEO IN jack on the TV (or VCR).

3Attach the white plug on the other end of the audio/video cable to the AUDIO jack (located under the small cover) on the back of the camcorder.

4Attach the yellow plug to the yellow VIDEO jack on the camcorder.

84 (continued on next page)