Powering Your Camcorder

Using the Adapter/Charger to Power Your Camcorder

The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery.

To AC 100-240V,

50/60 Hz

POWER

CHG

 

 

END

 

 

 

 

REFRESH

POWER

Indicator

DC OUT Jack

+

DC Cable

BATT.

RELEASE

 

VCR

POWER

OFF

CAMERA

AUDIO

RF

DC OUT

VIDEO

L E N S C O V RE

Attach Adapter/Charger

1.Connect one end of the DC cable to the DC OUT jack on the adapter/charger.

2.Connect the other end of the DC cable to the DC in jack on the camcorder as shown above.

3.Plug the adapter/charger’s plug into the nearest AC outlet (100-240V, 50/60Hz).

4.If the adapter/charger is properly connected, its POWER indicator will light.

Caution: Do not use this adapter/charger for any other purpose other than charging the FB1260 or FB120 battery pack or supplying power to the camcorder.

Remove Adapter/Charger

1.Unplug the adapter/charger from the wall outlet.

2.Remove the DC cable from the adapter/charger and camcorder.

Using an Optional Plug Adapter

An optional plug adapter may be required in some countries.

Optional AC

AC 100-240V

Plug Adapter

1.Plug the adapter/charger’s plug into the AC plug adapter.

2.Plug the AC plug adapter into the AC outlet.

12

Page 14
Image 14
RCA CC638/639 manual Powering Your Camcorder, Using the Adapter/Charger to Power Your Camcorder, Attach Adapter/Charger