Ending a Telephone call
1.A call can be ended in two fashions.
a.Press the Red ‘End Call’ button on the FLX Dialer during a call.
b.Place the Dialer in the charger. (‘Handset mode’ only)
2.When a call is ended the home screen is shown again.
3.Microphones not in the Charger Base will maintain their mute states (muted / unmuted) when a call is ended, and will start in this state when another call is made.
Calling a Directory Contact
1.A directory contact can be called in one of two ways.
a.Browse to contact menu: Menu Contacts. Select the contact, and press the green ‘Call’ key.
b.Browse to contact menu: Menu Contacts. Select the contact, and press the ‘Enter’ key or the ‘View’ key. From the contact view screen, press the green ‘Call’ key.
Active Call Management
The FLX2 System has many call features that can be used when receiving or making phone calls. These features can be controlled via the FLX Dialer during the call.
Caller ID
1.If the incoming caller is in the Contact List, Caller ID will display both name and number of the incoming contact.
2.If the incoming caller is not in the Contact List, Caller ID will display the incoming information from the network, which might include the telephone number and Caller ID.
NOTE: An incoming Bluetooth call will display caller ID information as well if it is presented by the network.
22
