Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP manual Audio Control

Models: 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP

1 90
Download 90 pages 54.1 Kb
Page 38
Image 38

Set Speed Dial

1.Browse to the Contacts menu: Menu Contacts, scroll to the desired contact, and press the ‘View’ key to access the contact.

2.The contact view screen shows the current name and number. Pressing the ’Edit’ key will open the Edit Contact menu.

3.In the Edit Contact menu select ‘Edit Speed Dial’.

4.Scroll to the desired speed dial number and press the ’Set’ key.

5.If this speed dial number is already set, an overlay will appear asking ‘Overwrite Speed Dial X?’

Calling a Speed Dial Number

To call a speed dial number, from the dial menu or from the home screen, press and hold the number key of the speed dial contact you want to call until the screen changes, showing that FLX is dialing the number.

Pressing and holding a number key that has not yet been assigned to a contact has no effect.

Audio Control

The following is a list of FLX Dialer menus that adjust the system attributes related to speaker audio, Analog audio inputs/outputs, telephony audio configurations, and muting microphones.

Speaker Volume

1.Browse to the Speaker Volume menu: Menu Audio Controls Speaker Volume.

2.The Speaker Volume screen is shown with graph and numerical value of the current volume level.

3.Press the up and down buttons to increase or decrease the volume.

4.During an active call or while in the home screen you can also set the volume by pressing the up and down buttons. In speaker mode or while in the home screen the speaker volume is set from this command. In handset mode the volume on the Dialer is adjusted.

38

Page 38
Image 38
Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP Audio Control, Set Speed Dial, Speaker Volume