Power On/Off the System Components
During normal use and operation of the FLX2 System, there is no need to turn off any part of the system. However, if the system is going to be stored without the Charger Base powered on, then each component should be powered off until further use.
Dialer On/Off
To power off the FLX Dialer, hold down the red ‘end call’ soft key until the device asks whether you want to shut it down. Confirm this by pressing ‘Yes’.
To turn the Dialer back on, either:
1.Hold down the red ‘end call’ soft key until the Dialer powers on.
OR
2.Simply return the Dialer to an active Charger Base and it will power on automatically.
Speaker On/Off
To power off the FLX Speaker, hold down the button located on the bottom of the Speaker until the LED indicators on the top of the Speaker turn solid red. Once the LED indicators are solid red, release the button and the Speaker will power off.
To power the Speaker back on, either:
1.Hold down the button on the bottom of the Speaker until the LED indicators on the top of the Speaker turn green. Once the LED indicators turn green, release the button and the Speaker will power on and connect to the system.
OR
2.Simply return the Speaker to an active Charger Base and it will power on automatically.
Microphones On/Off
To power off a FLX Microphone, hold down the button located on the Microphone until the LED indicator turns solid red. Once the LED indicator is solid red, release the button and the Microphone will power off.
To power a Microphone back on, either:
1.Hold down the button on the Microphone until the LED indicator on the Microphone turns green. Once the LED indicator turns green, release the button and the Microphone will power on and connect to the system.
OR
2.Return the Microphone to an active Charger Base and take it out again. It will power on automatically.
70
