Date/Time
1.Browse to the Date/Time menu: Menu Setup Set Date/Time.
2.To set the date or time, select either the ‘Set Date’, or ‘Set Time’ option, and press either ‘Enter’ or ‘Select’.
3.Edit time and date (month/day/year) using the numeric keys and the left and right buttons. The ‘Done’ key will store the value; ‘Cancel’ will discard any changes you entered.
4.To change the use of the network time, select the ‘Netwrk Time ON/OFF’ option. You change the setting by pressing the ‘Select’ key. If you select ‘Netwrk Time ON’ the FLX2 Conference Phone will attempt to derive the date and time from the IP network.
5.Time Zone allows the user to choose what the GMT offset at their location is.
6.The time format can be set to 12 Hr or 24 Hr, depending on user preference.
7.Daylight Savings Time can be set ON or OFF. The rules when daylight savings time starts and ends have to be specified in the web interface.
Bluetooth, Audio
The menu entries for Bluetooth and Audio in the setup menu will open the top level menus of the same name described earlier in this documentation.
Call Forwarding
1.To always forward incoming calls, switch ‘Always’ to ‘ON’ and enter the number to which to forward the calls.
2.To forward calls to another number when “Do not Disturb” is selected or both lines are busy, switch ‘Busy’ to ‘ON’, and enter the number to which to forward the calls.
3.To forward incoming calls when the call is not answered on the FLX system in a specific time, switch ‘No Answer’ to ‘ON’, and enter the number to which to forward the calls.
4.To set the time before the call is forwarded to the ‘No Answer’ number, select ‘No Answer Delay’ and set the time in seconds.
42
