Aux Audio
‘Aux Audio’ is to control the AUX In and AUX Out connectors on the base.
1.Aux In ON/OFF and Aux Out ON/OFF allow enabling / disabling the Aux connectors of the FLX phone.
2.Aux In Level allows changing the level of the Aux In signal.
3.Aux Out Level allows changing the level of the Aux Out signal.
4.Aux Out – MIC / LINE allows setting the level of the Aux Out connectors to either Mic level or Line level.
AEC
‘AEC’ allows controlling the Acoustic Echo Cancellation Level of the different Microphone types (Omni, Directional, or Lapel). Values are between 0 (least aggressive) and 8 (most aggressive). Factory default is 4.
RF Power
The RF Power level setting allows changing the signal strength of the base station and microphones. Factory default is HIGH. Low or medium can be selected to reduce the signal strength. Lower signal strength reduces the maximum distance between base station and any of the wireless devices. A lower setting might be desirable in environments where a lot of DECT traffic is encountered.
1.Browse to the RF Power menu: Setup Advanced Setup RF Power.
2.The user can adjust the RF Power from low to high.
44
