the Base Station. All components should automatically connect to the Base Station after a few seconds.

2.The Base Station is powered up, but the Status LED indicates a fault has happened by missing every fifth green double flash. Power down and power up the Base Station. All components should reconnect to the Base Station after a few seconds. The fault message in the Base Station will continue (every fifth double flash is skipped) – this just shows that a fault has happened in the past and can be ignored. If the components still do not connect to the base please contact Revolabs Support.

3.Are the Dialer, Microphone, and Speaker out of reach of the Base Station? Please bring the components closer to the Base Station to see whether this resolves the issue.

4.Power down the Base Station, the Microphones, the Dialer, and the Speaker. Now power up the Base Station. Once the Base Station is powered up (double green flashes of the Status LED), power up the Dialer, and then the Microphones and the Speaker. The components should now connect to the Base Station.

5.If the components still do not connect to the Base Station, please re-pair the components that have not connected to the Base Station, beginning with the Dialer. Pair of components to the Base Station is explained on page 42.

6.If the components still do not connect to the Base Station, please contact Revolabs support.

Microphone, Speaker, or Dialer not paired with Base Station

Please follow the descriptions on page 42 on how to pair the different components with the Base Station.

LED Indicators

Device LED Indicator

Status

 

 

Microphone in Charger Base

 

 

Steady Red

Charging

 

 

Steady Green

Fully charged

 

 

 

Active phone call, both microphones in Charger

Single red flash

Base, microphones muted via Master Mute or All

 

Mic Mute is ON

Double red flash

Active phone call, microphone(s) in Charger Base,

microphone is muted

 

Green flash

Active phone call, microphone in Charger Base is

unmuted

 

 

Microphone is powered off:

Off

o Microphone is not seated properly

 

o Charger Base is powered off

Microphone

not in Charger Base

 

 

Off

Microphone is powered off

 

 

Single green flash every second

On, connected, battery charged, un-muted

 

 

75

Page 75
Image 75
Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP manual LED Indicators