Speaker
1.To pair a Speaker first turn it off by pressing and holding the button on the bottom of the Speaker until you hear the Speaker
2.Ensure that the Base Station is plugged in and powered up.
3.On the Dialer, browse to the Pairing menu: Menu Setup Advanced Setup Pairing.
4.Select SPK 1 (Speaker 1) and press the ‘Enter’ or ‘Pair’ key to enter pairing state.
5.The screen will display ‘Pairing Speaker 1’.
6.Press and hold the button on the bottom of the Speaker until the LED turns solid red. The speaker is now in pairing mode.
7.After a short time an overlay will appear on the FLX Dialer saying ‘Pairing Successful’, after which the screen should read ‘SPK 1 Linked’.
8.If pairing was unsuccessful, the Speaker will show an alternating red
Microphone
1.To pair a Microphone, turn off the Microphone by holding the mute button until the LED turns red if it is not already turned off.
2.Ensure that the Base Station is plugged in and powered up.
3.On the Dialer, browse to the Pairing menu: Menu Setup
Advanced Setup Pairing.
4.Select MIC 1 (Microphone 1) or MIC 2 (Microphone 2) and press the ‘Enter’ key to enter pairing state.
5.The screen will display ‘Pairing Mic 1’ or ‘Pairing Mic 2’ depending on which Microphone you are pairing.
6.Press the mute button on the Microphone and hold it until the LED turns solid red. The Microphone is now in pairing mode.
7.After a short time an overlay will appear on the Dialer ‘Pairing Successful’, after that the screen should read ‘MIC 1
Linked’ or ‘MIC 2 Linked’, based on which one you were pairing.
9.If pairing was unsuccessful, the Microphone will show an alternating red - green slow blink sequence, indicating that the pairing failed. The Dialer will display a ‘Pairing Timeout’ message. In that case the pairing procedure should be repeated.
47
