Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP manual Admin Settings

Admin Settings

The Admin Settings menu allows changing settings that are related to general system settings.

Setting System Name

1.Go to Menu Setup  Advanced Setup  Admin Settings  Set System Name.

2.Change the current System Name to the new name, and press Enter.

Reset Defaults

1.Go to Menu Setup  Advanced Setup  Admin Settings  Reset Defaults.

2.Resetting defaults will revert back to factory defaults. Pairing of devices, recent calls, stored contacts, and the system name are not affected by this.

Set Password

1.Browse to the Set Password menu: Menu  Setup  Advanced Setup Admin Settings Set Password.

2.Set the password to an admin specified password. Note that setting this password will override the default password, so make sure that you will not lose the new password.

Log Out Admin

1.Browse to Log Out Admin: Menu  Setup  Advanced Setup Admin Settings Log Out Admin.

2.Once logged out, the user will have to retype the admin password to enter the administrative menus again. If the user leaves the administrative menus without logging out, an automatic log-out will happen after about 15 minutes.

Recent Calls ON / OFF

The Recent Calls option allows you to enable or disable logging of the recent calls. If you switch Recent Calls OFF the list of the recent calls will be erased and no information on recent calls will be kept in the system.

45