The table below describes the SIP Registration settings. Different IP PBX providers might use different names in their setup. The descriptions below will help you in mapping the FLX fields to your IP PBX fields.
SIP Registration
Registrar | This is the IP address or DNS name of the SIP registrar server. |
Use Proxy for | Use this option to indicate whether or not the SIP proxy server(s) |
Registration | specified in the Outbound Proxy field should be used when |
| registering. Select “Use Outbound Proxy” to have the system add |
| listed proxy servers to the route headers of the SIP REGISTER |
| request. |
Outbound Proxy | Enter the outbound SIP proxy server’s IP address or name in the |
| Outbound Proxy field. If there are multiple SIP proxies, separate the |
| addresses by a comma. Also note that on the SIP Settings page |
| there’s an option to allow strict routing. If that option is set and you |
| have a SIP proxy that is configured for loose routing, add the “;lr” |
| designation after the proxy’s address, for example, |
| “10.134.129.101;lr”. |
ID | ID is the phone’s SIP ID used for SIP registration. If this field is left |
| blank, the Username field will be used as the ID. |
Display Name | Display Name is the string that is shown at the far side when you |
| make outbound calls. If you do not provide a Display Name, the |
| Username will be used. Please note that your IP PBX might |
| override the Display name sent by the FLX and replace it with |
| names configured in the PBX. |
Username | This is the username for the account used to authentication with the |
| SIP registrar and proxies. |
Password | This is the password for the account used to authenticate with the |
| SIP registrar and proxies. |
Registration | Registration Timeout is the optional timeout for SIP account |
Timeout | registration, in seconds. The default is 55. If set to 0, the default will |
| be used. |
Auto Re- | If SIP registration is unsuccessful, this field specified the time |
registration Retry | duration between retry attempts, in seconds. The default is 300 |
Interval | seconds (5 minutes). |
57
