Rosewill EASYN400 user manual Resetting the RNX-EasyN400, Navigate RNX-EasyN400

Wireless RouterRNX-EasyN400 User Manual

3.1 Resetting the RNX-EasyN400

If you forget your password or IP address, or you cannot access the RNX-EasyN400 through Web Browser, you will need to use the <RESET> button at the back of the RNX-EasyN400 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the Username and password will be reset to “admin” and the IP address will be reset to “192.168.0.1”.

3.1.1 Procedure to Use the Reset Button

1.Make sure the power LED is on.

2.Press the RESET button for longer than 1 second to restart/reboot the RNX- EasyN400.

3.Press the RESET button for longer than 10 seconds until you see the power LED is blinking to set the RNX-EasyN400 back to its factory-default configurations.

3.2 Navigate RNX-EasyN400

The following will summarize on how to navigate RNX-EasyN400 in both AP

Router Mode and Repeater Mode.

27