Rosewill EASYN400 user manual Navigating RNX-EasyN400 in AP Repeater Mode, Alg

Wireless RouterRNX-EasyN400User Manual

	servers/clients in your LAN to handle different service/Internet application type (e.g.
	Email, FTP, Web server etc.) from the Internet.
Port tri.	In this section you can configure RNX-EasyN400 to support multiple connections
	for these types of applications
ALG	In this section, you can let the selected application to correctly pass through the NAT
	gateway.
UPnP	This allows you to discover PCs within your intranet for them to easily access
	through internet.
	QoS lets you classify Internet application traffic by source/destination IP address and
QoS	port number. You can assign priority for each type of application and reserve
	bandwidth for it.
Routing	This function allows You to set enable Static Routing to let RNX-EasyN400 forward
	packets by your routing policy

Tools

(For detail, please see Page 78.)

Admin	You can change the password required to log into the broadband router's system
	web-based management
Time	The Time Zone allows your router to reference or base its time on the settings.
DDNS	DDNS allows you to map the static domain name to a dynamic IP address.
Power	You can enable or disable Saving power in WLAN mode
Diagnosis	This page could let you diagnosis your current network status.
Firmware	This page allows you to upgrade RNX-EasyN400’s firmware.
Back-up	This page allows you to save the current router configurations.
Reset	You can reset the broadband router when system stops responding correctly or stop
	functions.

3.2.2 Navigating RNX-EasyN400 in AP Repeater Mode

AP Repeater mode has limited function compare to the AP Router mode.

30