Runco XP-50 43 431 linearly scales, Source image horizon, Played at the left and right, 432

Operation

Table 4-1. Aspect Ratio Settings (continued)

Aspect Ratio Setting
(Note)
	Input Image -> Displayed Image	Description
All Aspect	All Aspect
= ON	= OFF
		4:3 (4:3(1)) linearly scales
		the source image horizon-
		tally and vertically to fill a 4:3
		screen. Side panels are dis-
4:3(1)	4:3	played at the left and right
		edges of the screen.

		4:3(2) displays a 16:9
		source image in its original
4:3(2)	–	aspect ratio and masks the
		left and right sides.
		FILL is similar to
		VIRTUALWIDE2 (see
FILL	FILL	above), but employs a lin-
		ear, horizontal stretch.
		Note: This setting is not
		available with SD signals.
		LETTERBOX
		(LETTERBOX1) scales
		(zooms in on) a 4:3 image
		linearly (by the same
		amount on all sides) to fill a
		16:9 display, cropping the
LETTER-	LETTER-	top and bottom of the
BOX1	BOX	image.

16:9 images are vertically scaled by a factor of approximately 1.33, but the width is unchanged.

LETTER-	–	LETTERBOX2 scales
BOX2		(zooms in on) a 16:9 image
		linearly (by the same
		amount on all sides) to fill a
		16:9 display, cropping the
		image on all sides.

Note: To make all of the aspect ratio selections listed here available to the viewer, set All Aspect in the OPTIONS menu (described on page 51) to On.

CinemaWall XP-50/XP-65 Installation/Operation Manual 25