Runco XP-50, XP-65 operation manual Level see below, Currently active

Operation

Initial VOL level: Select Initial VOL level from the OPTIONS menu to set the desired sound volume level upon power-up.

Press or to set it to On, then use the VOL- or VOL+ () button to set the desired initial volume level. When you do, the volume changes so you can preview your selection before exiting the menu.

Note	You cannot set the Initial VOL level higher than the Maximum VOL
	level (see below).

Maximum VOL level: Select Maximum VOL level from the OPTIONS menu to prevent the sound volume from being set higher than a preferred threshold.

Press or to set it to On, then use the VOL- or VOL+ () button to set the maximum volume level. When you do, the volume changes so you can preview your selection before exiting the menu.

1. If you set the Maximum VOL level lower than the Initial VOL level

Note (see above), the Maximum VOL level is set automatically set equal to the Initial VOL level.

2.The volume display can go up to 63 regardless of the Maximum VOL level setting. However, increasing the volume setting beyond the Maximum VOL level has no effect.

INPUT lock: Select INPUT lock from the OPTIONS menu to allow only the selected input to be displayed and prevent the others from being selected. Set it to Off to allow any input to be selected.

Button lock: This menu option does not currently apply to the CinemaWall.

Remocon User level: Select Remocon User level from the OPTIONS menu to restrict

OSD menu access via the remote control. Choose one of the following:

•Off: No restriction. All remote control buttons are functional.

•User1: Only the POWER, INPUT, RECALL, SURROUND, MUTE, VOL- and VOL+ remote control buttons are functional.

•User2: Only the POWER button is functional.

•User3: Disables the remote control altogether.

Use this feature with caution. Once you select User3, the only Caution way to change it to something other than User3 is via the serial

command OSP:RCM0, OSP:RCM1 or OSP:RCM2. Refer to Serial Communications on page 55 for more information.

Off-timer function: Select Off-timer function from the OPTIONS menu to enable or disable the OFF TIMER () remote control button (see Figure 2-4).

Note	Setting Off-timer function to Disable cancels the Off-timer if it is
	currently active.

CinemaWall XP-50/XP-65 Installation/Operation Manual 49