Manuals / Runco / TV and Video / Flat Panel Television

Runco XP-50, XP-65 RS-232 Controller, Connection, Connecting External Speakers Optional

Models: XP-50 XP-65

1 82

Download 82 pages 33.68 Kb

Page 33

Installation

Use a straight-through RS-232 cable with a 9-pin male connector to connect a PC or		RS-232 Controller
home theater control/automation system (if present) to the RS-232 port on the		Connection
CinemaWall; see Figure 3-5.
For more information about using this connection, refer to Serial Communications on
page 55.
Personal Computer	(Male)
(or Control/Automation System)	(Male)

SERIAL

RS-232C Straight Cable

9-pin

Connector Pin Assignments:

1 2 3 4 5

6 7 8 9

2	Receive Data
3	Transmit Data
5	Ground
1, 4, 6, 9	Not Connected
7, 8	(shorted together)

Figure 3-5. RS-232 Control System Connection

Connect the (positive) and (negative) speaker wires to the SPEAKER-R and SPEAKER-L terminals; see Figure 3-6.Maintain the correct polarity. For more information, refer to the owner’s manual for your speakers.

Connecting External Speakers (Optional)

Speaker

Terminal (R)

Speaker Terminal (R)

1
2	1
	1
	2

Figure 3-6. External Speaker Connection

CinemaWall XP-50/XP-65 Installation/Operation Manual

19

Image 33

Runco XP-50, XP-65 RS-232 Controller, Connection, Connecting External Speakers Optional, Connector Pin Assignments

Contents

XP-50 XP-65 Page RuncoCare Standard Features RuncoCare Standard Two Year Limited WarrantyRuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Page Table of Contents Specifications Maintenance and TroubleshootingAppendix A. Default Settings OperationList of Figures List of Figures Xiv About This Manual IntroductionCertain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunctionKey Features and Benefits Description, Features and BenefitsOptional Accessories XP-50 Controls and Indicators Controls and FunctionsCinemaWall at a Glance Display Stand XP-506 XP-65 ConnectorsPower Input Surround button CinemaWall Remote ControlControls and Functions Installation Remote ControlOther surfaces Quick Setup Installation specialistStep Procedure For Details, refer to Installation Considerations Ventilation Ambient LightOther Considerations Connections to Connecting SourceCinemaWall Components toRCA-BNC adapter plug Analog RGB Connections Connector Pin Assignments Connecting External Speakers OptionalRS-232 Controller ConnectionAC Power Connection Turning on the Power Changing the OSD Language Setting the Day and TimeOperation Setting the Computer Display Properties Aspect ratio selection is saved independently for each input Selecting an Input Source Changing the Aspect Ratio149 169Source image horizon 43 431 linearly scalesPlayed at the left and right Edges of the screenActivating PIP Swapping the Main PIP Images Using Picture-In-Picture PIPSelecting a PIP Target Using the On-Screen MenusScreen or Input Source Changing the PIP Window PositionPOS./SIZE Options Picture This control is not available when Picture Menu is set to Typical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness POS./SIZE CinemaWall memorizes position and size settings separatelyFrequency is 108 MHz or greater Options menu refer to page 50 is set to OnSound Or 1080p and the Aspect Ratio is set to 169 refer toSET UP Signal Screensaver Is active On the remote control unit, or cycle power to the CinemaWall Order to activate multi-display mode, you must first set Refer to Changing the OSD Language onOn hides joints between displays C D Insert cannot be used when Transparency is set to on Transparency cannot be used when Insert is set to onPresent Time Setup Refer to Setting the Day and Time on Command Timer refer toDVD3 Operation Refer to Return ChangeCurrently active Level see belowSome cases, power is transmitted to the slot when When using multiple displays such as in a video wall RuncoMULTI-DISPLAY is active Picture menu is set to WarmUsing Digital Zoom During the delay period, the power indicator flashes greenOn page 21, the Clock Display setting has no effect Operation Cleaning Maintenance and TroubleshootingCleaning the Display Panel Body and Remote Control Cleaning the ScreenSymptom Possible Causes Solution Troubleshooting TipsCommand 3 bytes Parameter 6 bytes Command 3 bytes Parameter 3 bytesSerial Communications ExamplesHex Description Serial CommandsDwaovlon OSPSCR0 CinemaWall Specifications SpecificationsCinemaWall Model XP-50 Dimensions with Optional Table Stand CinemaWall DimensionsCinemaWall Model XP-65 Dimensions with Optional Table Stand Supported Timings Supported Signal Timings by Input Specifications Table A-1. Runco Factory Default Settings for CinemaWall Appendix A. Default SettingsDefault Settings Page 020-0970-00 Rev. B March