4 - Configuring the SAGEM F@st™ 1500 ADSL router

4.11.2Remote Management

By default, management access is only available to users on your local network. However, you can also manage the SAGEM F@st™ 1500 ADSL Router from a remote host by entering the IP address of a remote computer on this screen. Check the Enabled check box, and enter the IP address of the Host Address and click “Apply”.

If you check Enabled and specify an IP address of 0.0.0.0, any remote host can manage the SAGEM F@st™ 1500 ADSL Router.

For remote management via WAN IP address you need to connect by using default port 8080. Simply enter WAN IP address followed by :8080, for example, http://212.120.68.20:8080.

The Subnet Mask allows to limit IP source address to a range of sub-networks.

SAGEM F@st™ 1500 Reference Manual - 288053220-04 Reproduction and communication prohibited without the written permission of E Page 4-59

Page 105
Image 105
Sagem 1500WG manual Remote Management