Sagem 1500WG manual Figure C.2 RJ-11 Connector Pin Numbers, Pin Signal Name Wire Color

Appendix C - Cables

C.2.2 Wiring Conventions

For ADSL connections, a cable requires one pair of wires. Each wire is identified by different colors. For example, one wire might be red and the other, red with white stripes. Also, an RJ-11 connector must be attached to both ends of the cable.

Each wire pair must be attached to the RJ-11 connectors in a specific orientation. The following figure illustrates how the pins on the RJ-11 connector are numbered. Be sure to hold the connectors in the same orientation when attaching the wires to the pins.

Figure C.2 - RJ-11 Connector Pin Numbers

			Figure C.3 - RJ-11 Pinouts
Pin	Signal Name			Wire Color
1	Not used			_
2	Line 2	Tip		Black or White/Orange
3	Line 1	Ring		Red or Blue/White
4	Line 1Tip			Green or White/Blue
5	Line 2	Ring		Yellow or Orange/White
6	Not used			_

SAGEM F@st™ 1500 Reference Manual - 288053220-04 Reproduction and communication prohibited without the written permission of E Page C-5