Sagem 1500, 1500WG 2.1 Hardware Description

2 - Description and physical installation

SAGEM F@st™ 1500 Reference Manual - 288053220-04

Page 2-2 Reproduction and communication prohibited without the written permission of E

E E

E

Before installing the SAGEM F@st

TM

1500 ADSL Router, verify that you have all the items listed

under the Package Contents list (see § 1.4). If any of the item s are missing or damaged, contact

your local distributor.

Also be sure that you have all the necessary cabling befor e installing the SAGEM F@st

TM

1500

ADSL Router. After installing the ADSL Router, refer to “Configuring the SAGEM F@st

TM

1500

ADSL Router” on chapter 4.

2.1 Hardware Description

The SAGEM F@st

TM

1500 ADSL Router contains an integrated ADSL modem and connects to

the Internet or to a remote site using its RJ-11 WAN port. It can be connected directly to your

PC or to a local area network using any of the four Fast Eth ernet LAN ports.

Access speed to the Internet depends on your service typ e. Full-rate ADSL provides up to 8

Mbps downstream and 640 kbps upstream. G.lite (or splitt erless) ADSL provides up to 1.5 Mbps

downstream and 512 kbps upstream. However, you should n ote that the actual rate provided by

specific service providers may vary dramaticall y from these upper limits.

Data passing between devices connected to your local area ne twork can run at up to 100 Mbps

over the Fast Ethernet ports and 54 Mbps over the built-in wireless network adapter.

The SAGEM F@st

TM

1500 ADSL Router includes an LED display on the fr ont panel for system

power and port indications that simplifies installa tion and network troubleshooting. It also

provides the following ports on the rear panel.

Contents

Main Warning ! Contents 1. Introduction 1-1 2. Description and Physical installation 2-1 3. Configuring Client Computer 3-1 4. Configuring the SAGEM F@st 1500 ADSL router 4-1 A. Appendix A - Troubleshooting A-1 B. Appendix B - Safety warnings B-1 C. Appendix C - CABLES C-1 D. Appendix D - Technical specifications D-1 E. Appendix E - Default configuration E-1 List of figures 1. Introduction 1.1 About the SAGEM F@st 1500WG ADSL Router 1.2 Features and Benefits 1.3 Applications Wireless and Wired LAN Shared IP Address Virtual Server DMZ Host Support Security Virtual Private Network (VPN) 1.4 Composition of the supply 1.5 Prerequisites Page 2. Description and Physical installation 2.1 Hardware Description 2.1.1 Front panel 2.1.2 Rear panel 2.2 Physical Installation 2.2.1 Installation instructions Environment Power supply source Maintenance Page 2.3 Settings and Connecting 2.3.1 ISP settings 2.3.2 Install the SAGEM F@st 1500 ADSL Router 2.3.3 Connect the ADSL Line 2.3.4 Phone Line Configuration Page 2.3.5 Attach to Your Network Using Ethernet Cabling 2.3.6 Connect the Power Adapter 2.4 Powering up the SAGEM F@st 1500 ADSL router Page Page PC Mac 3.1 TCP/IP Configuration 3.2 Configuring your Windows computer 3.2.1 On Windows 98 / Me Page Page Page Obtain IP Settings from SAGEM F@st 1500 ADSL Router Page Page Page Page 3.2.3 On Windows 2000 Page Page Page 3.2.4 On Windows XP Page Obtain IP Settings from Sagem F@st1500 ADSL Router Page 3.3 Configuring your Mac computer Page Page Page SAGEM F@st 1500 ! Page Making Configuration Changes 4.1 STATUS Page 4.2 "SETUP WIZARD" menu 4.2.1 PPP Setting 4.2.2 Channel and SSID 4.2.3 WEP 4.2.4 Access Control 4.3 SYSTEM 4.3.1 Time Settings 4.3.2 Password Settings 4.3.3 Configuration tools 4.3.4 Firmware Upgrade 4.3.5 Reset 4.4 "WAN" menu E Page 4-17 4.4.1 ATM PVC Enter ATM (Asynchronous Trans fer Mode) function parameters here. E The following parameters only appear in "Routed" mode that you can select in the "Protocol" field: Page 4.5 LAN 4.5.1 VLAN Page 4.5.2 DNS 4.6 Wireless 4.6.1 Channel and SSID 4.6.2 Access Control Page 4.6.4 WEP 4.6.5 WPA Page Page 4.7 NAT 4.7.1 Address Mapping 4.7.2 Virtual Server 4.7.3 Special Application Page 4.8 Firewall 4.8.1 Access Control Page 4.8.2 MAC Filter 4.8.3 URL Blocking 4.8.4 Schedule Rule 4.8.5 Intrusion Detection 1) Intrusion Detection Feature 2) Stateful Packet Inspection Page 3) When hackers attempt to enter your network, we can alert you by e-mail 4) Connection Policy 5) DoS Criteria and Port Scan Criteria 4.8.6 DMZ 4.9 Route 4.9.1 Static Route Page Page 4.9.3 Routing Table 4.10 QoS 4.10.1 Traffic Mapping Page 4.10.2 Traffic statistics 4.11 Advanced 4.11.1 ADSL ADSL Page The following items are included on this inform ation page: 4.11.2 Remote Management 4.11.3 SNMP SNMP Setting SNMP Trap 4.11.4 UPnP 4.11.5 DDNS 4.12 Finding the MAC address of a Network Card Page Page Appendix A - Troubleshooting 1500 ADSL Router can be easily monitored through pa nel indicators to identify problems. Page Page Page B.1 Safety warnings B.1.1 Safety levels on the mains adapter unit B.1.2 Safety levels on the SAGEM F@st 1500 unit B.2 CE declaration of conformity Safety EMC Radio (specific to SAGEM F@st 1500WG) Page Page C.1 Ethernet cable C.1.1 Specifications C.1.2 Wiring Conventions C.1.3 RJ-45 Port Connection C.1.4 Pin Assignments General Straight-Through Wiring Crossover Wiring Page C.2.2 Wiring Conventions Page D. Appendix D - Technical specifications D.1 Mechanical Characteristics - Displays D.2 Electrical Characteristics ADSL Features Input Power D.3 Soft Component Features ATM Features Management Features Security Features LAN Features D.4 Radio Features Page Page D.5 Environmental characteristics Internet Standards E. Appendix E - Default configuration Appendix E - Default configuration E.1 Default user name and password for HTTP access Password Empty E.2 Default language for HTTP User Interface Language used to display HTTP pages: English E.3 Default configuration on the local area network side E.4 Default configuration on the wide area network side Note: The user can revert to the default configuration via the HT TP interface. E.5 Default configuration for advanced functions