Sagem 1500WG manual UPnP, Snmp Trap

4 - Configuring the SAGEM F@st™ 1500 ADSL router

Up to five community names may be entered.

SNMP Trap

Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent sends an SNMP trap message to any NMS specified as a trap receiver.

Parameter

Description

IP Address	Traps are sent to this address when errors or specific events occur on the network.
Community	A community string (password) specified for trap management. Enter a word,
	something other than public or private, to prevent unauthorized individuals from
	accessing information on your system.
Version	Sets the trap status to disabled, or enabled with V1 or V2c.
	The v2c protocol was proposed in late 1995 and includes enhancements to v1 that
	are universally accepted. These include a get-bulk command to reduce network
	management traffic when retrieving a sequence of MIB variables, and a more
	elaborate set of error codes for improved reporting to a Network Management Station.

4.11.4UPnP

Click Enable to turn on the Universal Plug and Play function of the ADSL Router. This function allows the device to automatically:

¾dynamically join a network,

¾obtain an IP address.

SAGEM F@st™ 1500 Reference Manual - 288053220-04 Reproduction and communication prohibited without the written permission of E Page 4-61