Manuals / Brands / Computer Equipment / Network Router / Sagem / Computer Equipment / Network Router

Sagem 1500, 1500WG 3) When hackers attempt to enter your network, we can alert you by e-mail, 4) Connection Policy

1 138

Download 138 pages, 5.35 Mb

4 - Configuring the SAGEM F@st™ 1500 ADSL router

SAGEM F@st™ 1500 Reference Manual - 288053220-04

Reproduction and communication prohibited without the written permission of E

E E

E Page 4-45

When particular types of traffic are checked, only the pa rticular type of traffic initiated from the

internal LAN will be allowed. For example, if the user only checks “FTP Service” in the Stateful

Packet Inspection section, all incoming traffic will be blocked except for FTP connect ions

initiated from the local LAN.

Stateful Packet Inspection allows you to select differ ent application types that are using dynamic

port numbers. If you wish to use the Stateful Packet Inspection (SPI) to block packets, click on

the Yes radio button in the “Enable SPI and Anti-DoS firewall protection�� field and then check

the inspection type that you need, such as Packet Fragmentation, TCP Connection, U DP

Session, FTP Service, H.323 Service, or TFTP Serv ice.

3) When hackers attempt to enter your network, we can alert you by e-mail

Enter your email address.

Specify your SMTP and POP3 servers, user name, and p assword.

4) Connection Policy

Enter the appropriate values for TCP/UDP sessions as d escribed in the following table.

Parameter Defaults Description

Fragmentation

half-open wait

10 sec Configures the number of seconds that a packet state structure

remains active. When the timeout value expires, the router drops

the unassembled packet, freeing that structure for use by another

packet.

TCP SYN wait 30 sec Defines how long the software will wait for a TCP session to

synchronize before dropping the session.

TCP FIN wait 5 sec Specifies how long a TCP session will be maintained after the

firewall detects a FIN packet.

TCP connection

idle timeout

3600 seconds

(1 hour)

The length of time for which a TCP session will be managed if there

is no activity.

UDP session

idle timeout

30 sec The length of time for which a UDP session will be managed if

there is no activity.

H.323 data

channel idle

timeout

180 sec The length of time for which an H.323 session will be managed if

there is no activity.

Contents

Main Warning ! Contents 1. Introduction 1-1 2. Description and Physical installation 2-1 3. Configuring Client Computer 3-1 4. Configuring the SAGEM F@st 1500 ADSL router 4-1 A. Appendix A - Troubleshooting A-1 B. Appendix B - Safety warnings B-1 C. Appendix C - CABLES C-1 D. Appendix D - Technical specifications D-1 E. Appendix E - Default configuration E-1 List of figures 1. Introduction 1.1 About the SAGEM F@st 1500WG ADSL Router 1.2 Features and Benefits 1.3 Applications Wireless and Wired LAN Shared IP Address Virtual Server DMZ Host Support Security Virtual Private Network (VPN) 1.4 Composition of the supply 1.5 Prerequisites Page 2. Description and Physical installation 2.1 Hardware Description 2.1.1 Front panel 2.1.2 Rear panel 2.2 Physical Installation 2.2.1 Installation instructions Environment Power supply source Maintenance Page 2.3 Settings and Connecting 2.3.1 ISP settings 2.3.2 Install the SAGEM F@st 1500 ADSL Router 2.3.3 Connect the ADSL Line 2.3.4 Phone Line Configuration Page 2.3.5 Attach to Your Network Using Ethernet Cabling 2.3.6 Connect the Power Adapter 2.4 Powering up the SAGEM F@st 1500 ADSL router Page Page PC Mac 3.1 TCP/IP Configuration 3.2 Configuring your Windows computer 3.2.1 On Windows 98 / Me Page Page Page Obtain IP Settings from SAGEM F@st 1500 ADSL Router Page Page Page Page 3.2.3 On Windows 2000 Page Page Page 3.2.4 On Windows XP Page Obtain IP Settings from Sagem F@st1500 ADSL Router Page 3.3 Configuring your Mac computer Page Page Page SAGEM F@st 1500 ! Page Making Configuration Changes 4.1 STATUS Page 4.2 "SETUP WIZARD" menu 4.2.1 PPP Setting 4.2.2 Channel and SSID 4.2.3 WEP 4.2.4 Access Control 4.3 SYSTEM 4.3.1 Time Settings 4.3.2 Password Settings 4.3.3 Configuration tools 4.3.4 Firmware Upgrade 4.3.5 Reset 4.4 "WAN" menu E Page 4-17 4.4.1 ATM PVC Enter ATM (Asynchronous Trans fer Mode) function parameters here. E The following parameters only appear in "Routed" mode that you can select in the "Protocol" field: Page 4.5 LAN 4.5.1 VLAN Page 4.5.2 DNS 4.6 Wireless 4.6.1 Channel and SSID 4.6.2 Access Control Page 4.6.4 WEP 4.6.5 WPA Page Page 4.7 NAT 4.7.1 Address Mapping 4.7.2 Virtual Server 4.7.3 Special Application Page 4.8 Firewall 4.8.1 Access Control Page 4.8.2 MAC Filter 4.8.3 URL Blocking 4.8.4 Schedule Rule 4.8.5 Intrusion Detection 1) Intrusion Detection Feature 2) Stateful Packet Inspection Page 3) When hackers attempt to enter your network, we can alert you by e-mail 4) Connection Policy 5) DoS Criteria and Port Scan Criteria 4.8.6 DMZ 4.9 Route 4.9.1 Static Route Page Page 4.9.3 Routing Table 4.10 QoS 4.10.1 Traffic Mapping Page 4.10.2 Traffic statistics 4.11 Advanced 4.11.1 ADSL ADSL Page The following items are included on this inform ation page: 4.11.2 Remote Management 4.11.3 SNMP SNMP Setting SNMP Trap 4.11.4 UPnP 4.11.5 DDNS 4.12 Finding the MAC address of a Network Card Page Page Appendix A - Troubleshooting 1500 ADSL Router can be easily monitored through pa nel indicators to identify problems. Page Page Page B.1 Safety warnings B.1.1 Safety levels on the mains adapter unit B.1.2 Safety levels on the SAGEM F@st 1500 unit B.2 CE declaration of conformity Safety EMC Radio (specific to SAGEM F@st 1500WG) Page Page C.1 Ethernet cable C.1.1 Specifications C.1.2 Wiring Conventions C.1.3 RJ-45 Port Connection C.1.4 Pin Assignments General Straight-Through Wiring Crossover Wiring Page C.2.2 Wiring Conventions Page D. Appendix D - Technical specifications D.1 Mechanical Characteristics - Displays D.2 Electrical Characteristics ADSL Features Input Power D.3 Soft Component Features ATM Features Management Features Security Features LAN Features D.4 Radio Features Page Page D.5 Environmental characteristics Internet Standards E. Appendix E - Default configuration Appendix E - Default configuration E.1 Default user name and password for HTTP access Password Empty E.2 Default language for HTTP User Interface Language used to display HTTP pages: English E.3 Default configuration on the local area network side E.4 Default configuration on the wide area network side Note: The user can revert to the default configuration via the HT TP interface. E.5 Default configuration for advanced functions