4 - Configuring the SAGEM F@st™ 1500 ADSL router

Once the ADSL Router has been connected to the Internet, you get the following message:

4.2.2Channel and SSID

Now, you can start the wireless configuration.

You must specify a common radio channel and SSID (Service Set ID) to be used by the SAGEM F@st™ 1500 ADSL Router and all of its wireless clients. Be sure you configure all of its clients to the same values.

Parameter

Description

 

 

ESSID

Extended Service Set ID. The ESSID must be the same on the SAGEM

 

F@st™ 1500 ADSL Router and all of its wireless clients.

ESSID Broadcast

Enable or disable the broadcasting of the SSID.

 

 

Wireless Mode

This device supports both 802.11g and 802.11b wireless networks. Make

 

your selection depending on the type of wireless network that you have.

Channel

The radio channel used by the wireless router and its clients to

 

communicate with each other. This channel number must be the same

 

on the ADSL Router and all of its wireless clients.

 

 

SAGEM F@st™ 1500 Reference Manual - 288053220-04 Reproduction and communication prohibited without the written permission of E Page 4-9

Page 55
Image 55
Sagem 1500WG manual Channel and Ssid, Parameter Description, Essid Broadcast, Wireless Mode