THE FAX MACHINE
Receiving a Fax

Reception Modes

Your machine has four reception modes:
In TEL mode, automatic fax reception is turned off. You can receive a fax only by
manually pressing START/COPY.
In FAX mode, the machine answers an incoming call and immediately goes into receive
mode.
In TAD mode, the caller can leave a message on your answering machine. If a fax tone
is detected, your fax machine begins reception automatically, overriding the answering
machine’s announcement.
This mode is available only when you have connected an answering machine to the
EXT. LINE jack on the rear of the machine.
In AUTO mode, the machine answers incoming faxes automatically. If no fax signal is
detected, the machine gives a secondary ringing tone to advise you of an incoming call.
When the machine is in Standby mode, the LCD shows the current reception mode.
If you rarely use the fax line for voice conversation, set the fax machine to receive faxes
automatically by selecting either FAX or AUTO mode.

Receiving in TEL Mode

1
Press RECEIVE repeatedly
until TEL appears in the
LCD.
4
When you are using the TEL mode
and an answering machine is installed,
you must switch off the answering
machine, otherwise the OGM from the
answering machine will interrupt your
telephone conversation.
TEL appears in the LCD
and the RECEIVE indicator
11-15 10:30 TEL
light is off.
3.
6 CHAPTER THREE: THE FAX MACHINE