Samsung MC286TATCSQ/EO manual Stopping the Cooking, Setting the Energy Save Mode

STOPPING THE COOKING

You can stop cooking at any time so that you can:

•Check the food

•Turn the food over or stir it

•Leave it to stand

To stop the cooking...	Then...
Temporarily	Temporarily : Open the door or press the STOP/ECO
	button once.
	Result:	Cooking stops.
	To resume cooking, close the door again and press the
	START/+30s button.
Completely	Completely : Press the STOP/ECO button once.
	Result:	Cooking stops.
	If you wish to cancel the cooking settings, press the
	STOP/ECO button again.

SETTING THE ENERGY SAVE MODE

The oven has an energy save mode.

•Press the STOP/ECO button.

Result: Display off.

• To remove energy save mode, open the door or press the STOP/ECO button and then display shows current time. The oven is ready for use.

Auto energy saving function

If you do not select any function when appliance is in the middle of setting or operating with temporary stop condition, function is canceled and clock will be displayed after 25 minutes.

Oven Lamp will be turned off after 5 minutes with door open condition.

USING THE SENSOR COOK FEATURES

The 8 Sensor Cook features include/provide pre-programmed cooking times. You do not need to set either the cooking times or the power level.

You can adjust the Sensor Cook category by turning the Knob Dial.

First, place the food in the centre of the turntable and close the door.

Use only dishes that are microwave-safe.

1. Press the Sensor button.

2. Select the type of food that you are cooking by turning the Knob Dial. Refer to the table on the following page for a description of the various pre-programmed settings.

3.Press the START/+30s button.

Result: Cooking starts. When it has finished.

1) The oven beeps 4 times.

2)The end reminder signal will beep 3 times (once every minute).

3) The current time is displayed again.

Use only recipients that are microwave-safe.

If the inside temperature is over the 60 °C, cooling fan will operate for 3 minutes. You can’t use Sensor button temporarily until oven get cool to a desired temperature for sensor safe mode.

The following table presents 8 Sensor Cook programmes. It contains its recommended weight range per item after cooking and appropriate instructions. In the beginning of the programme the display shows the sensor period. After this period the cooking time and power level is calculated automatically and the remaining cooking time will be displayed. The cooking process is controlled by the sensor system for your convenience.

Use oven gloves while taking out!

English - 16

MC286TATCSQ_EO_DE68-04126P-01_EN.indd 16

6/23/2014 11:42:53 AM