7Media
7.2.2Antenna
MENU [m] 
Media 
Channel 
Antenna 
ENTER [
]
Your TV memorizes channels and adds the memorized channels to the Channel. Before your TV can memorize channels, you must specify the signal source, either Air or Cable. If you select cable, when you start Auto Program, you must also specify the cable system type, STD, HRC, or IRC. If you don’t know your cable system type, contact your local cable company for the information. Most cable companies use STD.
zAir / Cable
7.2.3Auto Program
MENU [m] 
Media 
Channel 
Auto Program 
ENTER [
]
Scans for channels automatically and stores them in the TV’s memory.
1
2
3
4
5
6
Select Air or Cable or both by highlighting and then pressing [ 
].
If you selected Air or Cable or both on the Antenna screen, your choice will already be selected.
Select Next, and then press [ 
].
If you selected Cable, the Cable System screen appears. Select Digital, and then press [ 
].
If you selected Antenna only, Auto Program starts.
Select STD, HRC, or IRC, and then press [ 
].
Repeat for Analog.
Select Next, and then press [ 
]. Auto Program starts.
After all the available channels are stored, Auto Program removes scrambled channels. When done, the Auto Program menu then reappears. This process can take up to 30 minutes.
7 Media 123
