
9System
9.13.3BD Wise
Provides the optimal picture quality for Samsung DVD,
Available when you connect Samsung products that support BD Wise through an HDMI cable to the TV.
9.13.4Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
9.13.5Standby Control
You can set the screen standby mode to be applied when an input signal is received.
z
z
z
Auto
The message "No Signal" will appear if no source device is connected.
On
Off
The message "No Signal" will appear if no input signals are detected.
The Standby Control option is only enabled when Source is set to PC, DVI, HDMI or DisplayPort.
If "No Signal" is displayed although a source device is connected, check the cable connection. Refer to page 135 for details about connecting source devices.
9.13.6Lamp Schedule
Enables the lamp value to be adjusted to a
9.13.7OSD Display
Displays or hides a menu item on the screen.
zSource OSD / No Signal OSD / MDC OSD
9 System 172