9System
Troubleshooting for Anynet+
Problem |
| Possible Solution |
|
|
|
Anynet+ does not work. | z | Check if the device is an Anynet+ device. The Anynet+ system |
|
| supports Anynet+ devices only. |
| z You can connect only one receiver (home theater). | |
| z Check if the Anynet+ device power cord is properly connected. | |
| z Check the Anynet+ device’s Video/Audio/HDMI cable | |
|
| connections. |
| z Check whether Anynet+ | |
|
| setup menu. |
| z Check whether the remote control is Anynet+ compatible. | |
| z Anynet+ doesn’t work in certain situations. (Searching channels, | |
|
| operating Plug & Play (initial setup), etc.) |
| z If you have removed and then reconnected the HDMI cable, | |
|
| please make sure to search devices again or turn your product off |
|
| and on again. |
| z Check if the Anynet+ function of the Anynet device is set on. | |
|
|
|
I want to start Anynet+. | z | Check if the Anynet+ device is properly connected to the product |
|
| and check if the Anynet+ |
|
| Anynet+ Setup menu. |
| z Press the TOOLS button to display the Anynet+ menu and select | |
|
| a menu you want. |
|
|
|
I want to exit Anynet+. | z | Select View TV in the Anynet+ menu. |
| z Press the SOURCE button on the product remote control and | |
|
| select a non- Anynet+ device. |
|
|
|
The message “Connecting to | z | You cannot use the remote control when you are configuring |
Anynet+ device...” appears on |
| Anynet+ or switching to a view mode. |
the screen. | z | Use the remote control after the product has completed Anynet+ |
| ||
|
| configuration or has finished switching to Anynet+. |
|
|
|
9 System 176
