8Network
access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL
modems that support DHCP also let you use Static IP addresses.
8.1.2 Wired Network Settings
MENU [m] 
Network 
Network Settings 
ENTER [
]
Set the network connection to use various Internet services such as AllShare™ and perform software upgrades.
Network Settings
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot Connection
Previous
Connect to the network using
LAN cable. Please make sureNext that the LAN cable is
connected.
Cancel
The displayed image may differ depending on the model.
8 Network 139
