Installation
Power connection
Installation
L N
01 02 03
01BROWN or BLACK
02BLUE or WHITE
03YELLOW and GREEN
Plug the oven into an electrical socket. If a plug-type socket is not available due to allowable current limitations, use a multi- pole isolator switch (with at least 3 mm spacing in-between) in order to meet safety regulations. Use a power cord of sufficient length that supports the specification H05 RR-F or H05 VV-F, min. 1.5~2.5 mm².
Rated current(A) | Minimum cross- |
| sectional area |
| |
10 < A ≤ 16 | 1.5 mm2 |
| |
16 < A ≤ 25 | 2.5 mm2 |
| |
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on the cord clamp. Then, connect the power lines to the relevant connection terminals.
The (
)-terminal is designed for earthgrounding. First connect the yellow and green lines (earthgrounding), which must be longer than the others. If you use a plug-type socket, the plug must remain accessible after the oven is installed. Samsung is not responsible for accidents caused by missing or faulty earthgrounding.
WARNING
Do not step on or twist the wires during installation, and keep them away from heat- emitting parts of the oven.
12 English
NV75J5540RS_EE_DG68-00616D-01_EN.indd 12
2015-05-22 ��
11:49:37
