Bluetooth Settings

Configure your device’s Bluetooth settings.

Press and tap > > Bluetooth.

Change the Device Name

The device name identifies your device to other devices.

1.Press and tap > > Bluetooth.

2.If Bluetooth is not on, tap the ON/OFF slider to turn it on.

3.Tap > Rename device.

4.Enter a name for your device, and then tap OK.

Pair with a Bluetooth Device

Search for a Bluetooth device and pair with it, to establish a connection between your device and the target device. After pairing, your device and the target device will recognize each other, and you can connect without entering a passcode or PIN.

To listen to music with your headset or car kit, the headset or car kit must support the A2DP Bluetooth profile.

Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetooth-compatible devices.

1.Press and tap > > Bluetooth.

2.If Bluetooth is not on, tap the ON/OFF slider to turn it on.

3.Make sure that the headset is discoverable, so that your device can find the headset. Refer to the instructions that came with the headset to find out how to set it to discoverable mode.

4.Tap Scan to scan for Bluetooth devices within range.

5.When you see the name of your headset displayed in the Bluetooth devices section, tap the device. Your device then automatically tries to pair with the headset. If automatic pairing fails, enter the passcode supplied with your headset.

Tools and Calendar

108

Page 118
Image 118
Samsung SPH-P500TSASPR manual Bluetooth Settings, Change the Device Name, Pair with a Bluetooth Device, Tap Rename device