The pairing and connection status is displayed below the target device name in the Paired
devices section. When the target device is connected to your device, 
displays in the status bar.
Connect to a Paired Device
When you have paired another Bluetooth device with your device, you should be able to reconnect it automatically by turning on Bluetooth on both devices. However, sometimes you will need to reconnect manually, for example if you have been using your headset with another Bluetooth device.
1.Press 
and tap 
> 
> Bluetooth.
2.If Bluetooth is not on, tap the ON/OFF slider to turn it on.
3.Make sure that the headset is discoverable.
4.Tap the headset’s name in the Bluetooth devices section.
Note: If you cannot reconnect to the target device, follow the instructions in Disconnect from a Bluetooth Device, and then follow the instructions in Pair with a Bluetooth Device.
Disconnect from a Bluetooth Device
Disconnecting does not unpair the devices, so you can connect the devices at another time.
1.Press 
and tap 
> 
> Bluetooth.
2.In the Bluetooth devices section, tap 
next to the device to unpair, and then tap Unpair.
3.Tap Disconnect.
Unpair from a Bluetooth Device
When you unpair from a Bluetooth device, the devices will no longer connect automatically. To connect to the other device again, you’ll need to pair with the device again.
1.Press 
and tap 
> 
> Bluetooth.
2.In the Bluetooth devices section, tap 
next to the device name, and then tap Unpair.
Tools and Calendar | 109 |
