2.Plug the USB end of the USB cable into the Charging Head, and then plug the Charging Head into an electrical outlet to charge your battery. Fully charging a battery may take up to three hours.

Note: Your device’s battery should have enough charge for the device to turn on and find a signal, and set up the device. You should fully charge the battery as soon as possible.

3. Press and hold the Power/Lock button to turn the device on.

If your device is activated, it will turn on, search for Sprint service, and begin the setup application.

If your device is not yet activated, see Activate Your Device for more information.

Get Started

2

Page 12
Image 12
Samsung SPH-P500TSASPR manual