2.In the right pane of the main screen, the company search screen appears.

3.Provide the search criteria according to the item to find.

4.Click Search to start searching.

JIn the search list, you can also add, edit or delete items. From the tool bar, click < > to move to the input

screen. Select a searched item and click < > to move to the deletion (change) screen. Select a searched item

and click <> to delete it. If you want to delete multiple items at once, check all the items to delete in the search

list and click <> to delete them all at once.

FIRE GROUP SETTING [ADD]

JThis function will help open the entry door by releasing the lock on the door when a [Fire Sensor] event occurs, which is specified in [System Management] > [Input Point Setting]. This feature operates using SAMS Basic and SAMS Communication Server Basic, which may not work for the following reasons:

-If fire events are received late because of lots of events in standby

-If the system PC is turned off or does not work

-If the communication configuration and settings with the device are not established and specified properly

-If SAMS Basic or SAMS Communication Server Basic is not activated

This is just an auxiliary means to help opening the entry door when a fire occurs so you must install a separate hardware equipment to let you to manually open the door in case of a fire.

If a fire signal event occurs, SAMS Basic will open the doors of all registered sites. This is why you must specify the applicable entry doors by setting the fire group.

Note that when you are setting the fire group, you must connect the Door Lock to Relay 1 for S30xx/S210x, and Relay 1, 3, 8, and 10 for P40x(T), and Relay 1 for P102T.

(If you want to use SSA-P40xx as a fire group, the Door Lock should have been connected to Relay Output 1, 3, 8, and 10.)

MANAGEMENT OPERATION

English _129