logging in & initial setup
CARD HOLDER MANAGEMENT
You can register an ID and information on each card holder.
1.From the upper menu, select [Access Control] > [Card Holder Management].
2.Enter the [Employee ID].
3.Enter the [Name].
4.Select a [Company].
5.Select a [Department].
J If there is no company or department name, add in [Operation Management] > [Company Setting] and [Operation Management] > [Department Setting]. And then set company and department information in [Operation Management] >
6.Add the photo of the user.
J You can use bmp, jpg, jpeg, gif, png and wmf files. Since too big image file may cause delay in registration and display in monitoring screen, it is recommended to use smaller image file. It is recommended to use image files in jpg format. It is recommended to use image files of less than 100KB.