7.Move to the [Access Card Information] tab.
8.Select whether to use or not in [Whether to use the Card]. If Whether Use the Card is not checked, accessing will not be granted.
9.Select the [Access Card] for [Card Type].
10.Enter the [Card Number].
J Use a number in 4~8 digits or 10 digits. Enter a 4 ~ 8 digit number for 125KHz cards. Enter a 10 digit number for 13.56MHz cards.
11.Enter the [Password]. Enter a
12.Select the [Employee] for [Card Mode].
13.Select an [Access Group].
14.Click [Issue] button near the bottom of the screen.
15.Click Save <
> in the tool bar.
16.Click Transmit button <
> in the toolbar to send the card information to devices granted to the selected access group.
SETUP INITIAL & IN LOGGING
English _59