logging in & initial setup
J If unchecked, devices connected to the selected loop will not communicate.
6.Set the interval of polling in [Polling Speed (ms)]. Use the default 200.
7.Move to the [Serial Communication] tab.
8.Set the [Communication Port].
9.Set the [Speed].
J Communication speed varies depending on devices. Since the communication speed may vary depending on devices, refer to the product documentation of each device for proper setting.
10.Click Save <> in the tool bar.
11.When “Restart the Communication Server?” message appears, click [Yes(Y)].
J If SAMS Communication Server Basic is running and site configuration is properly done, communication server will restart normally. If SAMS Communication Server Basic is not running or the site information is improperly configured, communication server may fail to restart.