6.Select [Area].

7.Set [Reader IN] and [Reader OUT]. If reader device is installed only for entering, set [Reader IN] only. Set whether to use or not for each reader in [Enable] field.

8.Enter the [Reader].

9.Select a [Reader Type].

JFor SSA-R1xxx series, select Proximity Reader. For SSA-S21xx and SSA-S30xx series products too, select Proximity Reader since these Standalone controllers have built-in proximity readers. For SSA-R2000/2001, select Proximity Reader+Keypad. For SSA-R2010/R2020/R2040/R2011/R2021/R2041 products, select Biometrics Reader.

10.Click Save <> in the tool bar.

COMPANY SETTING

As additional information for each ID registration, it is required information. All information fields other than the company name are additional and optional.

The company name will be the key field for the [Access Group] configuration.

1.From the upper menu, select [Operation Management] > [Company Setting].

2.Enter the [Company]. You can add a logo for the company information.

3.Click Save <> in the tool bar.

SETUP INITIAL & IN LOGGING

English _55