MANAGEMENT SYSTEM
9.Set the [Communication Port].
10.Set the [Speed] for the communication.
J Communication speed, which is the baud rate, may differ from devices. You can specify the communication speed for each device (access controller). When setting the communication speed, specified both for the device and management program must match. For setting the device’s communication setting, refer to the product documentation for further details.
11.Click Save <
> in the tool bar.
12.When “Restart the Communication Server?” message appears, click [Yes(Y)].
J If SAMS Communication Server Basic is running and site configuration is properly done, communication server will restart normally. If SAMS Communication Server Basic is not running or the site information is improperly configured, communication server may fail to restart.
English _73