INPUT POINT SETTING [EDIT]
J There is no Add and Delete function for Input Point Setting. Input points are configured automatically at the time of device setting automatically, provided with default values appropriately for the device operations. Editing the input point setting is provided for changes and further refining of the settings.
1.From the upper menu, select [System Management] > [Input Point Setting].
2.Select an item to change using [Quick Find] in the tool bar.
3.Available input points are listed in the [Select Input] list on the right pane of the screen.
J Input points displayed may differ from device’s type that is registered in the Device Setting.
4.Select an input point to be edited from the [Select Input] list.
5.Move to the [Basic Setting] tab.
6.Enter the [Input Name]. The entered name is used for displaying events on the integrated monitoring screen when an event occurs on the corresponding input point.
7.Select an [Input Type]. Select [Exit Button] when the input is connected to an exit button, [Sensor] for sensors, [Door Contact] for door contact sensors, or [Fire Sensor] for fire detection sensors. For other devices, select [Normal Input].
8.Select the [Time Schedule]. This field is an optional item, set this if required. Set the time schedule for each input, if its function is linked to a time schedule. You can set the input to operate only for the time specified in the time schedule.
MANAGEMENT SYSTEM