logging in & initial setup
SITE SETTING
Configures the communication between the PC that is installed with SAMS Basic and Communication server.
Up to 10 sites can be added to the SAMS Basic, and each site requires its own Communication Server.
1.From the upper menu, select [System Management] > [Site Setting].
2.When adding a site, use Quick Find instead of Add for editing site information, since a site has default setting values. Click [Quick Find] on the top left corner and select the default value Default Site.
J If a site has been newly added, Site Setting of SAMS Communication Server Basic should be done again.
3.Edit [Site].
4.[Communication Server IP]: Enter the IP address of the computer that is installed with SAMS Communication Server Basic.
5.Check the port. It is recommended to use the default 51008.