Samsung VP-D385/XEO, VP-D381/EDC, VP-D381/XEF, VP-D385I/MEA manual 使用背光補償模式Blc, 然後按下 Joystick。

This function will be set to "Off" in the EASY Q mode.

advanced recording					進階錄製
					使用背光補償模式(BLC)
USING BACK LIGHT COMPENSATION MODE (BLC)
•	BLC works in both Camera and M.Cam								•BLC 可在 Camera 和 M.Cam 模式下操作。
									➥ 第 18 頁
•	modes. ➥page 18								•背光情形在主體比背景暗時發生：
	Back lighting exists when the subject is darker
									-	主體位於窗前。
	than the background:								-	將被錄製的人物穿著白色或亮色服飾、並處
	- The subject is in front of a window.
										於明亮的背景中、該人物的臉龐將顯得太暗
	- The person to be recorded is wearing
										而無法辨別其五官。
	white or shiny clothes and is placed against
		<BLC Off>				<BLC On>			-	主體在戶外、而背景陰暗。
	a bright background; the person’s face is
									-	光源太亮。
	too dark to distinguish his/her features.
									-	主體處於雪景中。
	- The subject is outdoors and the background		Camera Mode
			Camera	� Auto				1.	將選擇開關設定為 CARD 或 TAPE。
	is overcast.		White Balance
			Program AE	� Auto
	- The light sources are too bright.			� Off					（僅適用於 VP-D385( i ))
			Visual Effect
	- The subject is against a snowy background.		16:9 Wide	� On				2.	按下 MODE 按鈕以設定 Camera ( ).
			Macro	� Off
1.	Set the Select switch to CARD or TAPE.		DIS	� Off				3.	按下 MENU 按鈕。
	(VP-D385( i ) only).	Move Select				MENU	Exit		•將會顯示選單清單。

2.	Press the MODE button to set Camera (	).				4.	向上或向下移動 Joystick (▲ / ▼) 以選擇
3.	Press the MENU button.		Camera				"Camera"、然後按下 Joystick 或向右移動
			Camera Mode
	• The menu list will appear.		BLC		Off		Joystick () 。
4.	Move the Joystick (▲ / ▼) up or down to select		Digital Zoom		✔ On	5.	向上或向下移動 Joystick (▲ / ▼) 以選擇 "BLC"、
			C.Nite
	"Camera", then press the Joystick or move the		Light				然後按下 Joystick。
	Joystick () to the right.					6.	向上或向下移動 Joystick (▲ / ▼) 以選擇 "On"、
5.	Move the Joystick (▲ / ▼) up or down to select		Move	Select	MENU Exit		然後按下 Joystick。
	"BLC", then press the Joystick.						•若您不想使用 BLC 功能、可將 "BLC" 選單設定

6.	Move the Joystick (▲ / ▼) up or down to select		STBY SP	0:00:10	為 "Off"。
		16:9 Wide 10Sec		S 60min16BIt	7. 要結束、可按下 MENU 按鈕。
	"On", then press the Joystick.
	• If you do not want to use the BLC function,				•BLC ( ) 指示器將會顯示。
	set the "BLC" menu to "Off".	M 1/50	No Tape !		在 EASY Q 模式下、此功能將被設定為 "Off"。
7.	To exit, press the MENU button.
		29
	• BLC ( ) indicator will be displayed.		W	T
		12:00 1.JAN.2008		C.Nite 1/30

56_ English

臺灣 _56