PAS4•S | 1 Introduction |
|
|
1.5Manufacturer's Declaration
MNA1MLSDM00EN, V2.01, 07.2009
MANUFACTURER’S DECLARATION
according to EC Directive on Machinery 98/37/EG
We hereby declare that the following product:
Designation: | Portal axis with toothed belt |
| Portal axis with spindle |
|
|
Type: | PAS41x, PAS42x, PAS43x, PAS44x |
|
|
Product number: | 73xx xxxx xxx |
in the version delivered is intended for installation in a machine. Commissioning is prohibited unless the machine meets the regulations according to the EC directives. Please observe the safety instructions in our technical documentation.
Applied | EN ISO |
harmonized | Safety of machinery basic concepts, |
standards, | principles for design |
especially | Part 1: Basic terminology, methodology |
| EN ISO |
| Safety of machinery basic concepts, |
| principles for design |
| Part 2: Technical principles and specifications |
|
|
Applied national | Product documentation |
standards and |
|
technical |
|
specifications, |
|
especially |
|
|
|
Company stamp: |
|
Date/Signature: | 30 July 2009 |
Name/Department: Wolfgang Brandstätter/Development
Portal axes with ball screw drive | 17 |
