PAS4•S | 5 Commissioning |
|
|
5 Commissioning
@ WARNING
UNEXPECTED MOVEMENT
When the axis is operated for the first time, there is a risk of unex- pected movements caused by possible wiring errors or unsuitable pa- rameters.
•Verify that that the axis is properly fastened so it cannot come loose even in the case of fast acceleration.
•Note that vertically installed linear axes may lower unexpectedly.
•Verify that a functioning button for EMERGENCY STOP is within reach.
•Verify that the system is free and ready for the movement before switching it on.
•Run initial tests at reduced velocity.
Failure to follow these instructions can result in death, serious injury or equipment damage.
MNA1MLSDM00EN, V2.01, 07.2009
Portal axes with ball screw drive | 57 |
