PAS4•S | 2 Before you begin - safety information |
|
|
2.4Standards and terminology
Technical terms, terminology and the corresponding descriptions in this manual are intended to use the terms or definitions of the pertinent standards.
In the area of drive systems, this includes, but is not limited to, terms such as "safety function", "safe state", "fault", "fault reset", "failure", "er- ror", "error message", "warning", "warning message", etc.
Among others, these standards include:
•IEC 61800 series: "Adjustable speed electrical power drive sys- tems"
•IEC
tems - Part
•IEC 61158 series: "Industrial communication networks - Fieldbus specifications"
•IEC 61784 series: "Industrial communication networks - Profiles"
•IEC 61508 series: "Functional safety of electrical/electronic/pro- grammable electronic
Also see the glossary at the end of this manual.
MNA1MLSDM00EN, V2.01, 07.2009
Portal axes with ball screw drive | 21 |