8 Service, maintenance and disposal | PAS4•S |
|
|
8.2Maintenance
The maintenance intervals for cleaning and lubrication must be adhered to.
Include the maintenance intervals in your maintenance schedule.
8.2.1Cleaning
Due to its design, the product is not susceptible to the ingress of con- taminants and external objects. The guide is located inside the axis body and it is covered.
The product must be inspected and cleaned at regular intervals.
Do not use compressed air for cleaning.
Remove large particles and dirt from the surface at regular inter- vals.
The anodized surface only has a limited resistance to alkaline cleaning agents. Therefore, use only neutral cleaning agents for cleaning.
Use only damp, soft and
Cover strip The cover strip is
Remove abrasion products at regular intervals.
MNA1MLSDM00EN, V2.01, 07.2009
82 | Portal axes with ball screw drive |
