PAS4•S | 2 Before you begin - safety information |
|
|
2 Before you begin - safety information
2.1Qualification of personnel
Only appropriately trained persons who are familiar with and understand the contents of this manual and all other pertinent product documenta- tion are authorized to work on and with this product. In addition, these persons must have received safety training to recognize and avoid haz- ards involved. These persons must have sufficient technical training, knowledge and experience and be able to foresee and detect potential hazards that may be caused by using the product, by changing the set- tings and by the mechanical, electrical and electronic equipment of the entire system in which the product is used.
All persons working on and with the product must be fully familiar with all applicable standards, directives, and accident prevention regulations when performing such work.
2.2Intended use
This product is a portal axis with mounted motor and intended for indus- trial use according to this manual.
The product may only be used in compliance with all applicable safety regulations and directives, the specified requirements and the technical data.
Prior to using the product, you must perform a risk assessment in view of the planned application. Based on the results, the appropriate safety measures must be implemented.
Since the product is used as a component in an entire system, you must ensure the safety of persons by means of the design of this entire sys- tem (for example, machine design).
Operate the product only with the specified cables and accessories. Use only genuine accessories and spare parts.
The product must NEVER be operated in explosive atmospheres (haz- ardous locations, Ex areas).
MNA1MLSDM00EN, V2.01, 07.2009
Portal axes with ball screw drive | 19 |
