Optional Settings
Setting 05: TRANSACTION REPORT PRINT SELECTION
This sets the condition for printing out a Transaction Report. Enter a number
from 1 to 5 as follows:
1 | (ERROR/TIMER | A report will be printed after an error, timer |
| MEMORY): | operation, or memory operation |
2 | (SEND ONLY) | A report will be printed only after a |
|
| transmission |
3 | (ALWAYS PRINTS) | A report will be printed after each |
|
| transmission, reception, or error |
4 | (NEVER PRINTS) | A report will never be printed. |
5 | (ERROR. ONLY) | A report will be printed only after an error |
|
| occurs |
♦Initial setting: 5
Setting 06: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the
line is busy. Enter any number from 0 0 to 1 4 .
♦Initial setting: 02
Setting 07: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials
when the line is busy. Enter 0 1 for 1 minute, 0 2 for 2 minutes, etc., up to a maximum of 15 minutes.
♦Initial setting: 05
Setting 08: SECURITY SELECTION
Press 1 (ON) to turn polling security on, or 2 (OFF) to turn it off.
♦Initial setting: 1
6. Optional Settings
109