Timer Operations

Timer Operations

The Timer function allows you to store a job to be performed automatically at a specified time. Up to 59 timer jobs can be stored at any one time, and the time of each can be specified up to a week in advance.

You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed.

DOCUMENT

 

Note: M/?

cannot be used for a timer transmission.

Initial procedure

To store a timer job, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific job you want to store (see the following pages).

1

2

3

Press

TIMER

. (Flip up the Rapid Key

Display:

 

 

 

 

 

X/>

 

 

 

 

 

TIMER MODE

 

 

overlay if it is down.)

 

 

 

 

1=SET, 2=CLEAR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press 1 to select SET.

Enter a number as follows to select the desired operation (or scroll to

the desired operation with

or

and press

START/

).

ENTER

1Transmission (SEND MODE)

2Confidential transmission

3Polling

4Serial Polling

5Broadcasting

4 Enter a two-digit number for the hour (“01” to “12”) and a two-digit number for the minute (“00” to “59”).

78